|
|
|
|
|
Sani-V
(Back View)
Sani-V Explosion Vent
The Fike Sani-V is a single membrane explosion vent with integrated frame that is designed for the specific needs of clean production environments. The Sani-V explosion vent has excellent service life for vacuum/positive pressure up to 50% of burst pressure. It can handle partial vacuum conditions and provides stable performance over a wide range of temperatures. The integrated frame and process gasket of this sanitary explosion vent, make installation even easier and faster. This exclusive ATEX 95 Approved Vent provides instantaneous full opening of membrane in case of failure, eliminating undetected small openings and unwanted risks of contamination.
 Hygienic Design (CIP/SIP compliant)
Optimal Vent Area (100 % Venting Efficiency)
High Integrity Composite Design
Certified Burst Pressure
Simple, Maintenance-Free Installation
Fail Safe Design
Non-Fragmenting
Sani-V Explosion Vent Specifications:
| Shape: |
Rectangular |
| Standard Materials: |
FDA approved materials:
Membrane: Stainless Steel
Seal: Silicone
Process Gasket: EPDM (up to 120 deg. C); Silicone (up to 240 deg.C) |
| Burst Pressure Ranges: |
0.5 to 6.5 psig |
| Burst Pressure Tolerance: |
± 0.25 PSIG for burst pressure 1.5 psig or less
± 0.36 psig for burst pressure >1.5 and < 3.6 psig
± 0.75 psig for burst pressure > 3.6 psig |
| Operating Ratio: |
Up to 50% of the minimum stamped burst pressure |
| Vacuum Rating: |
Up to 50% of the minimum burst pressure |
| Process Temp. Range: |
-40 deg. F to 460 deg. F (continuous); up to 500 deg. F intermittent / -40 deg. C to 240 deg. C |
| Compliance: |
NFPA 68
ATEX directive |
 For more information on Fike's Sani-V Explosion Vent solution (pdf) ...
|
|
|
|
|