1.     What is the shelf life of my foam concentrate?
Depending on what type of foam concentrate you have, the typical shelf life will vary. Protein type concentrates have a shelf life of about 7 to 10 years. The synthetic type concentrates, which are the AFFF, ARC type AFFF, Class “A” and High-Expansion concentrates, have a shelf lives of 20 to 25 years.

Back To Top

2.     I bought some of your ARC type concentrate from your distributor a couple of months ago and I opened it yesterday and it has turned to gel. Is this product still good?
All alcohol-type AFFFs are gel-like in nature. You are probably more familiar with the standard AFFF that are for hydrocarbon products only. The ARC (alcohol resistant concentrate) have an ingredient called a polysaccharide, which gives it the gel-like nature and it is this ingredient that allows the ARC concentrates to work on polar solvent/water soluble liquids.

Back To Top

3.     But, it’s so thick; will I be able to proportion it?
The ARC concentrates have both psuedoplastic and thixotropis characteristics. This means that as the shear of the product increases (by pumping or suction), the viscosity decreases. Another example of a thixotropic product that you are familiar with is catsup. When the catsup bottle is first picked up, it is very difficult to pour, but once the shear of the product increases, you usually have more catsup than you wanted. When the bottle is set back on the table, the catsup thickens up again.

Back To Top

4.     How often do I have to test my foam concentrate and system?
The foam concentrate for foam premix should be tested once a year per NFPA. ANSUL will test both concentrate and premixes for a nominal charge (See Foam Analysis Request Form # F-88195-3). The system should be tested per the applicable NFPA standard or per NFPA 25 (Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems.)

Back To Top

5.     What materials can I use with ANSUL foam products?
For acceptable materials of construction for use with ANSUL foam concentrates, refer to ANSUL Technical Bulletin #59.

Back To Top

6.     Are ANSUL foam agents environmentally friendly?
Yes. Refer to ANSUL Technical Bulletins #52 and 60.

Back To Top

7.     Are the ANSUL foam agents biodegradable?
ANSUL foam agents are biodegradable. For specific information please refer to ANSUL Technical Bulletin #52 and 60.

Back To Top

8.     Where can I purchase a de-foaming agent?
De-foaming agent or anti-forming emulsion can be purchased through the Dow Corning Corporation of Midland, Michigan. Please contact the Dow Corning Process Aids and Additive Center at (800) 362-6373 for further information.

Back To Top

9.     Are the ANSUL foam concentrates compatible with the other manufacturers foam agents?
For specific information regarding the compatibility of foam concentrates, please refer to ANSUL Technical Bulletin #64.

Back To Top