|
|
|
|
|
Vmax Explosion Vent
Specifically designed for sanitary applications with vacuum service, the Vmax is a single element, lightweight explosion vent. This multi-domed, high performance explosion vent has excellent service life, is vacuum rated and provides stable performance over a wide range of temperatures. The Vmax explosion vent has superior dynamic performance during explosions and provides faster response than other devices due to its lower mass per unit area. The integral gasket/seal will allow the vent to be mounted on most equipment without additional sealants.
 Optimal Vent Area (100 % Venting Efficiency)
Certified Burst Pressure
Full, Controlled Opening
Simple, Maintenance-Free Installation
Fail Safe Design
High Integrity Composite Design
Vmax Explosion Vent Specifications:
| Shape: |
Rectangular |
| Standard Materials: |
FDA approved materials: 316 stainless steel, inconel tabs, teflon integral gasket / seal |
| Burst Pressure Ranges: |
0.5 to 5.0 psig |
| Burst Pressure Tolerance: |
± 0.25 PSIG for burst pressure 1.0 PSIG or less
± 0.5 PSIG for burst pressures >1.0 PSIG |
| Operating Ratio: |
Up to 80% of the min. stamped burst pressure |
| Vacuum Rating: |
From -3.0 PSIG to -8.35 PSIG depending on size |
| Process Temp. Range: |
0 deg. F to 350 deg. F / 0 deg. C to 175 deg. C |
| Compliance: |
NFPA 68 |
 For more information on Fike's Vmax Explosion Vent solution (pdf) ...
|
|
|
|
|