|
|
|
|
|
Sani-VS Explosion Vent
Fike's Sani-VS explosion vent is specifically designed for Clean In Place/Steam In Place applications and offers excellent service life for vacuum/positive pressures up to 80% of the minimum burst pressure. This explosion vent can handle vacuum conditions and provides stable performance over a wide range of temperatures. The integrated frame and gasket make installation even easier and faster. This exclusive ATEX 95 Approved Vent provides instantaneous full opening of membrane in case of failure, eliminating undetected small openings and unwanted risks of contamination.
 Hygienic Design (CIP/SIP compliant)
No External Frame -- Easy Installation and Cost Savings
Optimal Vent Area (100 % Venting Efficiency)
High Integrity Composite Design
Simple, Maintenance-Free Installation
Fail Safe Design
Non-Fragmenting
Sani-VS Explosion Vent Specifications:
| Shape: |
Rectangular |
| Standard Materials: |
FDA approved materials:
Membrane: Stainless Steel
Seal: Silicone
Process Gasket: EPDM (up to 120 deg. C); Silicone (up to 240 deg.C) |
| Burst Pressure Ranges: |
0.5 to 6.5 psig |
| Burst Pressure Tolerance: |
± 0.25 PSIG for burst pressure 1.5 psig or less
± 0.36 psig for burst pressure >1.5 and < 3.6 psig
± 0.75 psig for burst pressure > 3.6 psig |
| Operating Ratio: |
Up to 80% of the minimum stamped burst pressure |
| Vacuum Rating: |
Up to -13 psig depending on size |
| Process Temp. Range: |
-40 deg. F to 460 deg. F (continuous); up to 500 deg. F intermittent / -40 deg. C to 240 deg. C |
| Compliance: |
NFPA 68
ATEX directive |
 For more information on Fike's Sani-VS Explosion Vent solution (pdf) ...
|
|
|
|
|